FC20-07 display cases OPEN 2.0 (Cube 2)

NEW
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)
картинка FC20-07 display cases OPEN 2.0 (Cube 2)

Main features:

  • Nominal voltage 220 V, 50 Hz
  • Cooling type – dynamic
  • Equipment climate class: 3
  • Refrigerant R290, R404a
  • The display cases are designed for use in enclosed spaces with natural ventilation at an ambient temperature of +12 to +25 °C and relative humidity of no more than 60%.
  • Загрузить BIM-модели Download Cube 2 leaflet
    The display case must be installed no closer than 2 m from heating devices. It is prohibited to operate the display case if it is exposed to direct sunlight or air currents from air conditioners, fans, and heaters.
    The clearance between the back wall of the display case and the wall of the room must be at least 0.25 m.
                
    PROVIDE FOR THE CONNECTION OF THE EVAPORATION TRAY OVERFLOW TO THE GENERAL DRAINAGE SYSTEM OF THE ROOM!

    It is necessary to load the display case with products pre-cooled to the temperature of the usable volume, placing them evenly on the shelves.  
    The load on the shelf should not exceed: 10 kg - 0.6; 13 kg - 0.7; 19 kg - 1.0; 25 kg - 1.3; 18 kg - 1.9; 25 kg - 2.5.

    It is forbidden to block the air ducts.
    Failure to comply with these requirements will disrupt air circulation and impair the performance of the product, which may result in food spoilage.

    Condensation may form on the display case in rainy or humid weather. This is not a malfunction. In this case, wipe the display case with a soft cloth from time to time.
    • Electronic control unit
    • Steel body
    • Body insulation - polyurethane foam
    • Top LED lighting
    • Condensate evaporator
    • 4 rows of shelves
    • Defrosting method - natural heat flow
    • Adjustable support legs
    • Additional shelf
    • LED lighting for each shelf (4000K, PINK)
    • Top LED lighting (PINK)
    • Wire/plexiglass divider
    • Price tag holders h-39 mm
    • Fruit set (mirror panel, divider for two rows of shelves)
    • Wheel supports h-130 mm (length 0.6; 0.7; 1.0; 1.3)
    • Night curtain
    • Electric defrosting device
    • Internal volume divider (1.9; 2.5)
    • Bracket-overlay set, sausage hanger
    • Hanger set, meat hook

    Blueprints