Showcases AC59 SLIDER (AMRA)

картинка Showcases AC59 SLIDER (AMRA)
картинка Showcases AC59 SLIDER (AMRA)
картинка Showcases AC59 SLIDER (AMRA)
картинка Showcases AC59 SLIDER (AMRA)

Main features:

  • Rated voltage 220 V, 50 Hz
  • Cooling type – dynamic
  • Climatic class of equipment: 3
  • Refrigerant R600a, R290
  • The display cases are intended for use indoors with natural ventilation at ambient temperatures from +12 to +25 and relative humidity no more than 60%
  • Загрузить листовку AC59 (AMRA) Загрузить изображения Загрузить баннер и иллюстрации для SMM Загрузить 3D модели
    The compact, mobile display case is ideal for small cafes and bars with high traffic, when it is necessary to reduce the workload of staff. The display case is equipped with sliding doors-sliders on both sides - on the buyer's side for self-service and on the seller's side for easy loading of goods.

    INSTALLING a refrigerated display case:
    The display case should be installed no closer than 2 m from heating appliances. It is prohibited to operate the display case if it is exposed to direct sunlight, air flows from air conditioners, fans and heaters.
    SOME PARTS HAVE A PROTECTIVE COATING (FILM) THAT MUST BE REMOVED.
    After starting the unit, and when the required temperature is reached, load the display case with products pre-cooled to the temperature of the useful volume.
    The height of display of products for display should be no more than 150 mm on the bottom tray and no more than 100 mm on the shelves.
    Attention, the load on the grid shelf is no more than:
    0.7 upper-8 kg; lower-12 kg
    0.9 top-11; lower-16 kg
    1.2 upper - 14 kg; lower-21 kg
    Do not block the air ducts.
    If the requirements are not met, air circulation is disrupted, the performance characteristics of the product deteriorate, which can lead to food spoilage.
    In rainy or humid weather, condensation may form on the display case. This is not a malfunction. In this case, wipe the display case with a soft cloth from time to time.

    Overall packaging dimensions LxWxH, mm (wooden lathing):
    0.7 850x750x890
    0.9 1050x750x890
    1.2 1350x750x890
    • Compressor made in Europe
    • Carel electronic control unit
    • Steel body
    • Thermal insulation of the body - polyurethane foam
    • Stainless steel exposure surface
    • 2 grid shelves with limiters, with the possibility of installation at an angle of 5 degrees
    • Condensate evaporator (refrigeration)
    • Side LED lighting
    • Glazing - tempered double-glazed windows
    • Front sliding doors
    • Rear sliding doors
    • Adjustable support legs

    • Shelf for wine bottles
    • Price holders
    • Pasta tray (1 section, 2 sections)
    • Sandwich stand
    • Price tray for small baked goods

    Blueprints